The escape hatch YUMK-320-01NP

This hatch can use for following buses	Low-floor buses and trolleybuses...
Positions of an open cover of the hatch	1. forward 2. back 3. right side 4. left side 5. In parallel the roof
The sizes of a hole in a roof for hatch, mm.	790 х 590; radius on corners - 105
Thickness of a package of a roof, mm.	from 50 till 100

This is a modification of UMK-320 sunroof with long handles. This sunroof can to use for low-floor buses, trolleybuses, vans etc.

This escape hatch completely corresponds to all requirements of GOST R 41.52 – 2005 and ECE Rules numbers 52 and 107.

The rectangle 50x70 cm. is entered in the size of a hatch hole.

The fixing gear of the hatch accurately fixes a hatch cover in all open positions.

In the closed position the escape hatch provide full leakproofness of a vehicle roof from hit of an atmospheric precipitation. A temperature mode of operation of the hatch from -45°C to +85°С.

A design of this escape hatch is completely maintainable.

The hatch cover completely leaves from an aperture both from within and outside for a free exit (input).

The hatch design excludes any possibility of its unforeseen opening.

The cover and the decor frame made from ABS-plastic raw material.